YRT-3熔点仪

YRT-3熔点仪

本仪器的设计完全符合中华人民共和国药典附录“熔点测定法”的规定。

主要技术指标：

• 熔点测定范围：室温至270℃（高于270℃时，可定制）

• 升温速率：0.5℃/分、1.0℃/分、1.5℃/分、3.0℃/分四档（如需其他速率可按用户要求定制）

• 线性升温速率偏差：<5%

• 熔点测定精度：低于200℃时不大于±0.5℃

• 高于200℃时不大于±1.0℃

• 温度预置：室温至250℃范围内任意预置

•传温介质：甲基硅油

• 传温液杯：250ml高型烧杯

• 环境温度：20℃±10℃

• 电源：AC  220V±10% ；50Hz  

• 功率：200W

性能特点：

• 当样品熔化时可记录初熔温度、全熔温度的值。

• 熔点仪有三个工作状态：复位状态、准备状态、测试状态

YRT-3 MELTING POINT TESTER

The apparatus’ design accords with 《Chinese Pharmacopoeia》 appendix “methods of melting point determination “ provisions completely .

Main Technical Specifications:

•The measuring range of melting point :room temperature to 270 ℃(over 270℃，can custom-tailor)

•The heating speed :0.5℃ per minute ,1.0℃ per minute ,1.5℃ per minute, 3.0℃ per minute, four kinds （if need other speeds, you can custom-tailor according to you request）

•Linearity heating rate deviation :<5 ％

•Melting point testing precision: below 200 ℃, no bigger than  ±0.5℃;above 200℃,no bigger than ±1.0℃

•Preset temperature: preset random in range of room temperature to 260℃

•Temperature transfer medium: methyl silicone oil

•Temperature transfer liquid-cup: 250ml high model beaker

•Environment temperatuer:20℃±10℃

•Electrical source: AC220V±10％, 50Hz

•Power: 200W

Performance characteristic

•When sample melting, you can record the value of incipient melting temperature and the end of melting temperature

•Melting Point Tester have operating state: rest state, readiness state, testing state.